CCS2 – what is it and how does fast charging for electric cars work?

0
CCS2 – what is it and how does fast charging for electric cars work?

The rapid growth of electromobility is increasing the importance of access to efficient charging infrastructure. Electric vehicle drivers expect solutions that enable them to replenish battery energy quickly, both during daily commutes and on longer journeys. One of the standards used for this purpose is CCS2, a system that enables high-power DC charging. Its design combines the widely used Type 2 connector with additional DC contacts, ensuring broad compatibility.

What is CCS2 and how does fast charging of an electric vehicle work?

We explain in this article.

 

 

 

What is CCS2?

CCS2 (Combined Charging System 2), also known as Combo 2, is the European version of the Combined Charging System, enabling electric vehicles to be charged using both alternating current (AC) and direct current (DC). The connector design is based on the Type 2 standard, supplemented with two additional DC contacts. Requirements for DC connectors are defined, among others, by the IEC 62196-3 standard.

It is the most widely used charging solution in Europe, allowing vehicles to be charged with both AC and DC power through a single connector. The CCS2 standard supports everything from slower AC charging devices, such as home wallbox chargers equipped with a compatible connector, to high-power DC charging stations capable of delivering 350 kW or more. The actual charging power, however, depends on the vehicle's capabilities, the station's specifications and the battery's operating conditions. Thanks to its versatility, CCS2 is suitable for a variety of charging scenarios and is used by many new fully electric vehicles available on the European market.

How does CCS2 fast charging work?

CCS2 fast charging follows a specific sequence in which digital communication and safety checks play a crucial role. Once connected, the plug is locked into the vehicle inlet to prevent accidental disconnection during the charging session. The charging station and the vehicle then establish communication using PLC (Power Line Communication) technology, which transmits data through the charging cables.

Before energy transfer begins, the system performs a series of safety checks, including verification of the insulation resistance within the high-voltage circuit. Power delivery starts only after these checks have been successfully completed and the charging system is fully prepared. At the end of the session, power flow is stopped and the connector can be unlocked and safely disconnected.

CCS2 charger – how to properly connect and charge a vehicle

Connecting a vehicle to a CCS2 charger is a straightforward process, but it is important to follow the correct sequence. First, park the vehicle so that the charging port is within reach of the charging cable. Next, open the charging port cover and insert the CCS2 connector, ensuring that it is properly seated.

The charging session can then be started according to the instructions displayed on the charger's interface. Depending on the device, it may be necessary to confirm the start of charging. Once charging is complete, the session should be ended following the station's instructions before disconnecting the plug and closing the charging port cover. It is important not to pull the cable out by force or disconnect it before the charging process has been completed.

CCS2 charging stations – which solution should you choose?

Our portfolio includes DC charging stations equipped with CCS2 connectors designed for various applications. The range includes a 30 kW model, as well as solutions featuring dual CCS2 connectors with power outputs of 60 kW and 120 kW. These charging stations can be used in a variety of locations, including public parking areas, commercial facilities, service sites and fleet charging infrastructure.

Post comments (0)

up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper.pl